E Ride Pro SR Specs & Setup Guide

The E Ride Pro SR has hit the E Moto market with specs that pack a punch! The value that you get out of the Incredible price point ($5,599.00) is truly remarkable in comparison to bikes in years past. 

E Ride Pro SR Specifications:

Acceleration: 0-30 MPH in 1.8 seconds

Top Speed: 62 MPH

Motor Power: 25kW Peak Power

Range: Up to 100 miles @ 15 MPH / 62 miles @ 25 MPH

Battery: 72V 50Ah (3600Wh)

Charge Time (20%-90%): 3.5 hours

Tire Size: Front 80/100-19; Rear 100/90-18

Weight Limit: 302 lbs

Unit Weight: 183 lbs

Seat Height: 33.5 inches

Wheelbase: 49.6 inches

Ground Clearance: 10 inches

Frame: Reinforced frame & swing arm

Suspension: FastAce PRO V Suspension

Brakes: DOT4 hydraulic brakes (front) & Automatic Regenerative/Finger Regen brake (rear)

For a complete guide on how to Unbox and Build the E Ride Pro SR check out our Youtube! 

In this video we go step by step through how to build the bike out of the box. We also go over the display and handlebar functions, as well as a walkthrough the E Ride Pro App!

E Ride Pro SR Testing

Professional Athlete Brett Baldwin (Insta: @brettb35) took the E Ride Pro SR and tested this bike. The primary focus of this testing session was to get the bike as capable and controllable as possible out of the box. 

After rigorous testing these are the settings Brett landed on for the type of terrain he was riding. 

One of the biggest improvements made to this bike during the testing session was moving the steering spacer from the lower portion of the upper triple clamp to the top of the stem. This allowed for the front forks to slide down and raise the front end of the bike significantly. This is very needed due to the large 18" rear tire on this bike causing the platform to be pitched forward. 

APP POWER ADJUSTMENT

FULL TESTING SESSION

E ride pro

Leave a comment

All comments are moderated before being published