Description
ALL NEW EBMX X-9000 V3 Controller
Built from the ground up for serious riders and racers, the EBMX X-9000_V3 is more than just a controller — it’s a complete performance ecosystem. With a re-engineered power stage, cutting-edge logic system, and a redesigned user interface, it’s the most advanced, rider-tuned controller on the market.
Whether you’re dominating urban streets, carving trails, or hitting the racetrack, the X-9000_V3 delivers unmatched power, precision, and customization.
Complimentary fuse kit included. This X-9000 V3 controller kit includes our High Voltage Fuse Kit at no extra charge. Visit the fuse kit page for installation instructions, and read our fuse guide for more information.
EBMX X-9000 V3 App and Display Walkthrough
Power Meets Control
- 50kW Output | 1000A Phase Current | 1600A Burst
- 30 120V Infineon MOSFETs for performance and reliability under extreme conditions
- Redesigned Multilayer PCB & CNC Copper Busbars for superior thermal control
- Water-Cooling Option for race-level endurance
- IP67 Rated & CNC Alloy Case – Built to take the punishment
- Max Battery Amps 700A
Next Gen Logic
- Industry-Leading 68 IO Support – Runs anything, from race bikes to full-featured builds
- Custom EBMX VESC Firmware with Field-Oriented Control (FOC) for silky smooth throttle control, enhanced motor control, and greater efficiency
- Integrated IMU for Wheel Lift Assist – Fully programmable for launch control, anti-loop, or stunt mode
- Dual Hall Throttle Ready – Two ADC inputs, increased throttle safety and reliability
Race-Ready, Rider Tuned
- 6 Fully Customizable Power Levels (Race + Street Modes)
- Graphical UI for Throttle Tuning, Regen Braking & EBMX E-Clutch
- Load & Go Battery Profiles – Over 15 plug-and-play setups
- Preloaded Motor Tunes – 30+ motors supported out of the box
- One-Touch Updates – OTA firmware & compatibility expansion
Built for the Bikes You Ride
- SurRon Light Bee
- SurRon Ultra Bee – Works with your OEM Peripherals/Display!! Does not come with thumb regen lever or display (SW102/BC351)
- Talaria MX3 / MX4 / MX5
- Talaria XXX / XXX Pro
- E Ride Pro SS 2.0 (With V3 Battery Plug)
- E Ride Pro SS 3.0 (With Breaker)
- E Ride Pro SS 3.0 (Without Breaker)
- E Ride Pro SR
- ReRode R1
- QS138 Motors
Colored Heatsinks available for purchase separately
*Please note all X-9000 sent from July 2025 will be Version 3. Colored v2 heatsinks are compatible with the V3 controllers. V2 Wiring harnesses are NOT compatible.
The current list of motors that the X-9000 is compatible with is below:
- OEM SurRon Light Bee
- OEM SurRon Ultra Bee
- OEM Talaria Sting MX3
- OEM Talaria Sting R MX4
- OEM Talaria Sting MX5
- EBMX XLB-60
- EBMX XTA-60
- EBMX XUB-80
- KO RS SurRon
- KO F Spec SurRon
- KO F Spec Talaria
- QS138 – 90H
- QS138 – 70H
- OEM E Ride Pro SS 2.0
- OEM E Ride Pro SS 3.0
- OEM E Ride Pro SR
| EBMX X-9000-V3 SPECIFICATIONS | |
| RATED POWER | 50kW (CONTINUOUS) |
| VOLTAGE | 120V |
| WORKING VOLTAGE RANGE | 48V – 110V |
| PHASE | 1000A (continuous) 1600A (burst) |
| MOSFETS | Infineon |
| CONTROL PROTOCOL | Field Oriented Control (FOC) VESC |
| FEATURES |
Built-in IMU for integrated wheel-lift control |
| FIRMWARE | VESC-based motor control and firmware modified by EBMX |
| OPERATING TEMPERATURE RANGE | -25 to 80 °C |
| Kit Contents |
X-9000 Controller |
| WATERPROOFING | IP67 |
| WARRANTY | 2 Years |
| HEAT SINK COLORS | Black / Red / White / Blue |
EBMX X-9000 V3 CONNECTOR GUIDE
With multiple different bikes having many different variations it is important to verify that you have ordered the correct Installation Kit for your Electric Dirt Bike.
Surron Light Bee X Installation Kit:
This Kit comes with:
- I.O. Wiring Loom
Surron Ultra Bee Installation Kit:
This Kit comes with:
- Ultra Bee Side Mounting Brackets
- I.O. Wiring Loom
- Installation Hardware
This Kit does not include:
- Does NOT include thumb regen lever
- Does NOT include SW102 nor is it compatible with SW102/BC351 Displays
This Kit is compatible with OEM Display & Peripherals
E Ride Pro SS 2.0 (Updated Plug)
This is the new Updated E Ride Pro SS 2.0 Battery Connector Plug
This Kit comes with:
- 2.0 Side Mounting Brackets
- New Battery Leads
- Installation Hardware
- I.O. Wiring Loom
- Skid Plate
E Ride Pro SS 2.0 (Old Plug)
If your E Ride Pro SS 2.0 has the Battery Connector pictured below click HERE to purchase the old Battery Lead Separate to install your V3 EBMX X-9000 Controller.
Note: This Battery Lead is prone to melting. This is the reason E Ride Pro has switched to the new style of connector.
E Ride Pro 3.0 (Breaker)
The first few batches of E Ride Pro SS 3.0's came with breakers connected to the battery lead. If your E Ride Pro 3.0 has a circuit breaker purchase this Variant:
This Kit comes with:
- 3.0 Side Mounting Brackets
- New Battery Leads
- I.O. Wiring Loom
- Installation Hardware
E Ride Pro 3.0 (no breaker)
If you have the latest E Ride Pro SS 3.0 that does not have a circuit breaker connected to the Battery Power Lead purchase this Variant:
This Kit comes with:
- 3.0 Side Mounting Brackets
- New Battery Leads
- I.O. Wiring Loom
- Installation Hardware
E Ride Pro SR
This Kit comes with:
- SR Side Mounting Brackets
- New Dual Battery Leads
- I.O. Wiring Loom
- Installation Hardware
Talaria XXX
This kit is for the Talaria XXX
This Kit comes with:
- Side Mounting Brackets
- I.O. Wiring Loom
- Skid Plate
Talaria MX3 / MX4 / MX5
For all versions of Talaria Sting you will Utilize this installation Kit
This Kit comes with:
- I.O. Wiring Loom
- Mounting Hardware
Rerode R1
This kit is for the Rerode R1 and comes with:
- Rerode Side Mounting Brackets
- I.O. Wiring Loom
- Mounting Hardware
QS138
For QS138 Motors you will need to purchase the wiring separately.
Coming Soon
