Description
This DIY kit is crucial to our DNM tune
The damper rebuild kit consists of
- 3 thicker compression shims (replaces the smaller OEM compression shims)
- 2 IFP O-rings
- 2 air cap O-rings
- 2 SKF Fork Seals
DNM HD Fork Spring is VERY Highly Recommended add-on with this kit for the ultimate in DNM performance on your Surron, Segway, or Talaria
Disclaimer: this should only be installed by a qualified suspension mechanic. If you don't have extensive suspension tuning experience, this is not for you.
If you've tuned suspension yourself, have the specific tools needed (see below), oil, and a couple hours to spare, this DIY kit is just for you!
Tools required
- 5wt Fork Fluid (IFP depth should be 70mm deep from the end/bottom of the tube. Fill it up from there, then shake out bubbles. Then thread on the compression. It will overflow a bit, but be full of oil)
- 12mm shaft clamp
- Large 12" Knipex pliers
- Medium 10" Knipex pliers
- Torch (to loosen the oem loctite)
- Small flathead screwdriver or dental pick
- Shock pump