EBMX BC351 Display and Bar Clamps for X-9000
EBMX BC351 Display and Bar Clamps for X-9000
EBMX BC351 Display and Bar Clamps for X-9000
EBMX BC351 Display and Bar Clamps for X-9000
EBMX BC351 Display and Bar Clamps for X-9000
EBMX BC351 Display and Bar Clamps for X-9000
EBMX BC351 Display and Bar Clamps for X-9000
EBMX BC351 Display and Bar Clamps for X-9000
EBMX BC351 Display and Bar Clamps for X-9000
EBMX BC351 Display and Bar Clamps for X-9000
EBMX BC351 Display and Bar Clamps for X-9000
Roll over image to zoom in Click on image to zoom
EBMX BC351 Display and Bar Clamps for X-9000EBMX BC351 Display and Bar Clamps for X-9000EBMX BC351 Display and Bar Clamps for X-9000EBMX BC351 Display and Bar Clamps for X-9000EBMX BC351 Display and Bar Clamps for X-9000EBMX BC351 Display and Bar Clamps for X-9000EBMX BC351 Display and Bar Clamps for X-9000EBMX BC351 Display and Bar Clamps for X-9000EBMX BC351 Display and Bar Clamps for X-9000EBMX BC351 Display and Bar Clamps for X-9000EBMX BC351 Display and Bar Clamps for X-9000

EBMX BC351 Display and Bar Clamps for X-9000

Controller: X-9000-V2
Price:
$266.00
Search For Bikes, Parts, & Accessories
Search

This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.

Description

All new color display for the X-9000-V2/V3 controller with EBMX UI including ride data. No setup required just install and ride (note 830 and above firmware is required)

Compatibility

  • SELECT WHICH X-9000 CONTROLLER YOU HAVE: V2 or V3
  • V3 X-9000 uses different firmware than the V2 unit, they are not interchangeable
  • The EBMX BC351 Color Display is not directly compatible with the EBMX X-9000 V3 controller on the Surron Ultra Bee. To enable proper functionality, the EBMX Ultra Bee Race Harness is required, along with either a 2023 model battery or an aftermarket battery. The current X-9000 V3 controller is designed and wired to work with the OEM display and peripherals, and will not support the BC351 display without these additional components.
  • Not compatible with any other aftermarket/OEM controllers.

Kit Includes:

  • CNC mounts for MTB and Moto Bars (31.8 and 28.6)
  • New canbus 2-1 cable
  • 3.5 Inch TFT display

Available to purchase separately:

  • CNC Case for the display (Purple, Red, Black, Blue) 
  • Drop In Mount for Ultra Bee