Description
Labor fees
- Tune Up: Inspect for issues, fix minor issues, grease head bearing, grease suspension bearings, clean and lube chain, tighten spokes and minor wheel truing
- Tire Install includes (1) tire and (1) tube install, if you order a complete front/rear set you will need two of these.
- Controller Install requires your physical bike, we perform the complete installation including battery bypass
- Fork Installation of a new fork, we cut the steer tube, install star nut, press in lower bearing and spacer, remove your old fork and install the new fork and install necessary spacers for headset tension. Some forks require a Zero Stack headset (sold separately)
- Fork Install Kit - Installation of our Fork Install Kit onto a new fork (Direct Mount Length)
- Fork Spring Installation for any coil spring fork
- Fork Cut Tube Install Starnut OEM Length is meant for new forks purchased from us, we will cut the steer tube and install the starnut before shipping it to you. We HIGHLY RECOMMEND purchasing this Fork Install Kit at the same time so we can also install this making you fork plug and play. This option cuts the steer tube to the OEM length which will require many spacers if you install a direct mount stem.
- Fork Cut Tube Install Starnut Direct Mount Length is meant for new forks purchased from us, we will cut the steer tube and install the starnut before shipping it to you. We HIGHLY RECOMMEND purchasing this Fork Install Kit at the same time so we can also install this making you fork plug and play. This option cuts the steer tube shorter for a Cane Creek ZS44/28.6 Upper headset and to be used with a direct mount headset. NOT COMPATIBLE with an OEM stem. Steer tube will be cut to 7.5" and will likely require some additional steer tube MTB spacers.
- Bike Wash: Bikes brought to us too dirty to work on will be charged a $99 cleaning fee