EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
EBMX X-9000-V3 CONTROLLER KIT
Roll over image to zoom in Click on image to zoom
EBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KITEBMX X-9000-V3 CONTROLLER KIT

EBMX X-9000-V3 CONTROLLER KIT

Bike: Light Bee X
Price:
$1,199.00

Description

ALL NEW EBMX X-9000 V3 Controller

Built from the ground up for serious riders and racers, the EBMX X-9000_V3 is more than just a controller — it’s a complete performance ecosystem. With a re-engineered power stage, cutting-edge logic system, and a redesigned user interface, it’s the most advanced, rider-tuned controller on the market.

Whether you’re dominating urban streets, carving trails, or hitting the racetrack, the X-9000_V3 delivers unmatched power, precision, and customization.

 

EBMX X-9000 V3 App and Display Walkthrough

Power Meets Control

  • 50kW Output | 1000A Phase Current | 1600A Burst
  • 30 120V Infineon MOSFETs for performance and reliability under extreme conditions
  • Redesigned Multilayer PCB & CNC Copper Busbars for superior thermal control
  • Water-Cooling Option for race-level endurance
  • IP67 Rated & CNC Alloy Case – Built to take the punishment
  • Max Battery Amps 700A

Next Gen Logic

  • Industry-Leading 68 IO Support – Runs anything, from race bikes to full-featured builds
  • Custom EBMX VESC Firmware with Field-Oriented Control (FOC) for silky smooth throttle control, enhanced motor control, and greater efficiency
  • Integrated IMU for Wheel Lift Assist – Fully programmable for launch control, anti-loop, or stunt mode
  • Dual Hall Throttle Ready – Two ADC inputs, increased throttle safety and reliability

Race-Ready, Rider Tuned

  • 6 Fully Customizable Power Levels (Race + Street Modes)
  • Graphical UI for Throttle Tuning, Regen Braking & EBMX E-Clutch
  • Load & Go Battery Profiles – Over 15 plug-and-play setups
  • Preloaded Motor Tunes – 30+ motors supported out of the box
  • One-Touch Updates – OTA firmware & compatibility expansion

Built for the Bikes You Ride

  • SurRon Light Bee
  • SurRon Ultra Bee – Works with your OEM Peripherals/Display!! Does not come with thumb regen lever or display (SW102/BC351)
  • Talaria MX3 / MX4 / MX5
  • Talaria XXX
  • E Ride Pro SS 2.0 (With V3 Battery Plug)
  • E Ride Pro SS 3.0 (With Breaker)
  • E Ride Pro SS 3.0 (Without Breaker)
  • E Ride Pro SR
  • ReRode R1
  • QS138 Motors
  • WILL NOT WORK WITH TALARIA XXX PRO, Coming Soon!

Colored Heatsinks available for purchase separately

*Please note all X-9000 sent from July 2025 will be Version 3. Colored v2 heatsinks are compatible with the V3 controllers. V2 Wiring harnesses are NOT compatible.

The current list of motors that the X-9000 is compatible with is below:

  • OEM SurRon Light Bee
  • OEM SurRon Ultra Bee
  • OEM Talaria Sting MX3
  • OEM Talaria Sting R MX4
  • OEM Talaria Sting MX5
  • EBMX XLB-60
  • EBMX XTA-60
  • EBMX XUB-80
  • KO RS SurRon
  • KO F Spec SurRon
  • KO F Spec Talaria
  • QS138 – 90H
  • QS138 – 70H
  • OEM E Ride Pro SS 2.0
  • OEM E Ride Pro SS 3.0
  • OEM E Ride Pro SR
EBMX X-9000-V3 SPECIFICATIONS
RATED POWER 50kW (CONTINUOUS)
VOLTAGE 120V
WORKING VOLTAGE RANGE 48V – 110V
PHASE 1000A (continuous)
1600A (burst)
MOSFETS Infineon
CONTROL PROTOCOL Field Oriented Control (FOC) VESC
FEATURES

Built-in IMU for integrated wheel-lift control
Dual hall throttle ready
X-Series App compatible for custom tuning
Pre-tuned for stock and aftermarket batteries
Tuned for 30+ motors
FIRMWARE VESC-based motor control and firmware modified by EBMX
OPERATING TEMPERATURE RANGE -25 to 80 °C
Kit Contents

X-9000 Controller
Plug and Play Harness and Mount Kit
Air Cooled Heat Sink (Black)
SW102T Color Display
Thumb Throttle
Bluetooth Module
1-2 Harness
WATERPROOFING IP67
WARRANTY 2 Years
HEAT SINK COLORS Black / Red / White / Blue

 

With multiple different bikes having many different variations it is important to verify that you have ordered the correct Installation Kit for your Electric Dirt Bike.

Surron Light Bee X Installation Kit:

This Kit comes with:

  • I.O. Wiring Loom

 

Surron Ultra Bee Installation Kit:

This Kit comes with:

  • Ultra Bee Side Mounting Brackets
  • I.O. Wiring Loom
  • Installation Hardware

This Kit does not include:

  • Does NOT include thumb regen lever
  • Does NOT include SW102 nor is it compatible with SW102/BC351 Displays

This Kit is compatible with OEM Display & Peripherals

E Ride Pro SS 2.0 (Updated Plug)

This is the new Updated E Ride Pro SS 2.0 Battery Connector Plug

This Kit comes with:

  • 2.0 Side Mounting Brackets
  • New Battery Leads
  • Installation Hardware
  • I.O. Wiring Loom
  • Skid Plate

E Ride Pro SS 2.0 (Old Plug) 

If your E Ride Pro SS 2.0 has the Battery Connector pictured below click HERE to purchase the old Battery Lead Separate to install your V3 EBMX X-9000 Controller.

Note: This Battery Lead is prone to melting. This is the reason E Ride Pro has switched to the new style of connector. 

E Ride Pro 3.0 (Breaker) 

The first few batches of E Ride Pro SS 3.0's came with breakers connected to the battery lead. If your E Ride Pro 3.0 has a circuit breaker purchase this Variant:

This Kit comes with:

  • 3.0 Side Mounting Brackets
  • New Battery Leads
  • I.O. Wiring Loom
  • Installation Hardware

E Ride Pro 3.0 (no breaker)

If you have the latest E Ride Pro SS 3.0 that does not have a circuit breaker connected to the Battery Power Lead purchase this Variant:

This Kit comes with:

  • 3.0 Side Mounting Brackets
  • New Battery Leads
  • I.O. Wiring Loom
  • Installation Hardware

 

E Ride Pro SR

This Kit comes with:

  • SR Side Mounting Brackets
  • New Dual Battery Leads
  • I.O. Wiring Loom
  • Installation Hardware

Talaria XXX

This kit is for the Talaria XXX

This Kit comes with:

  • Side Mounting Brackets
  • I.O. Wiring Loom
  • Skid Plate

Talaria MX3 / MX4 / MX5

For all versions of Talaria Sting you will Utilize this installation Kit

This Kit comes with:

  • I.O. Wiring Loom
  • Mounting Hardware

Rerode R1

This kit is for the Rerode R1 and comes with:

  • Rerode Side Mounting Brackets
  • I.O. Wiring Loom
  • Mounting Hardware

QS138 

For QS138 Motors you will need to purchase the wiring separately. 

Coming Soon