Description
One of the plushest forks we’ve ridden.
Included in package:
- Dorado 29 Expert Fork
- Boost disk rotor spacer
How to Install a Fork onto Surron or Talaria
Required for Install
- Fork Install Kit
- Zero Stack ZS44/28.6 Top Headset (do not replace lower)
- Star Nut
- Lower Bearing and Spacer
- Steer tube cut
- Star Nut pressed into steer tube
- Steer tube spacers to set correct tension
- Lower bearing and spacer removed from OEM fork and pressed onto steer tube
- Tools and Experience (take it to your local MTB shop for install)
Services Available With Your Fork Purchase
- Cut Steer Tube to OEM Length and Install Starnut
- Cut Steer Tube shorter for Direct Mount Stem and Zero Stack Headset
- Install new lower bearing and spacer (Limited Availability)
Get Inverted
Back and better than ever the new Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you’re looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah the Dorado Expert has you covered. Featuring an all-new 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide, the new Dorado is your ticket to the best ride you’ve ever had.
Specifications
- Wheel Size: 29"
- Weight: 3120g
- Offset: 57mm (29")
- Ride Height: 602mm (29")
- Travel: 180, 190, 203mm internally adjustable
- Spring: Dorado Air with Incremental Volume Adjust (IVA)
- Compression Damping: TPC+ with Hydraulic Bottom Out (HBO)
- Rebound Damping: Cartridge Adjustable TPC
- Adjustments: Air, Air Volume, Rebound, HS and LS Compression
- Steerer: 1-1/8" Straight
- Crown: Forged
- Leg Diameter: 37mm
- Leg Material: 6000 Series Aluminum
- Brake Post Mount: 203mm (223 Max)
- Axle: 110mm x 20mm BOOST Thru Axle
- Max Tire Size: 67mm
- Extras: Threaded TSR
- Options: Fender
- E-Bike Compatible: Yes
Installation Details
Out of the box this fork will not fit the surron steer tube with the 1" tall roller bearing adapter that comes on the OEM surron. Swapping your upper headset to a Cane Creek 40 which reduces the steer tube length by approximately 1/2" will allow it to fit. It his highly recommended you take this to your local bike shop for proper installation!! Many of the aftermarket forks we see on bikes that come through our shop were not installed properly and have caused damage to customers bikes. Please do not install this fork if you are not an experienced bike builder.