What is Charged Cycle Works?
Charged Cycle Works (CCW) is the #1 e-commerce store for electric motorcycles, parts and accessories, based in North Salt Lake, Utah. We sell, test, service and race electric motorcycles, and we develop aftermarket parts for them.
The short version of who we are:
- Founded in 2021 by Brian and Nate who are lifetime riders and racers and have been on eMoto bikes since they first reached the U.S. market.
- The #1 U.S. dealer for EBMX products, including the X-9000 controller and XLB, XTA, and XUB motors.
- More than 25,000 riders served since 2021, with tens of thousands of orders shipped from our own warehouse. We stock what we sell.
- A full service department and wheel-building shop with a showroom in North Salt Lake.
We publish what we learn. Our blog and YouTube channel cover install guides, bike reviews, spec comparisons and race reports going back to 2022.
Bikes we support
We stock parts, publish setup guides and build upgrade paths for these platforms:
- Sur-Ron Light Bee S / X
- Sur-Ron Ultra Bee
- Talaria Sting MX3 / MX4 / MX5
- Talaria Komodo
- E Ride Pro S / SS 2.0 / SS 3.0 / SR
- Ventus One / One+
- Bonnell 775 MX / 805 / 902
- Stark Varg
- Many other electric motorcycles
We have also ridden and reviewed bikes outside that list, including the Dust Moto Alpha prototype, the 2026 Zero XB and the Altis Sigma.
How we test
We ride every bike and part before we recommend it. Our testing covers four areas.
Real-world range. We measure range on actual trails and tracks, not at a steady cruise on flat ground. Conditions vary from test to test, but every one uses real off-road terrain at real riding speeds, aimed at the range an average rider will get.
Suspension. We carry and tune Sirris, EXT and RFLOXA for electric dirt bike chassis, from hard enduro to motocross. Our RFLOXA Ultra Bee review includes a spring rate guide and clicker settings. Our EXT write-up covers the E Ride Pro SS 3.0 and SR.
New bike reviews and shootouts. We review new bikes when they arrive and follow up after long-term use. Examples: the E Ride Pro SR vs Altis Sigma MX vs Ventus One shootout and the small-size electric dirt bike spec comparison.
Racing and durability. We race what we sell. See our Knolls Sprint Enduro report and hard enduro on the Sur-Ron Ultra Bee. Parts that fail under us do not make it into our recommendations.
After testing, we turn the results into upgrade paths matched to riding style, so you buy parts in the order that makes the biggest difference.
What we specialize in
Power: batteries, controllers and motors
- Controllers. EBMX, Torp and VTB, with tuning support. We are the #1 U.S. dealer for EBMX products, including the X-9000 controller.
- Motors. Built for the load and heat of off-road use. See our EBMX XTA-60 review and Talaria install guide.
- Batteries. 60V and 72V upgrades, plus higher-capacity packs for more range. Our battery voltage chart and battery fuse guide are good starting points.
Chassis: wheels, tires, brakes, suspension and cockpit
-
Wheels. We build wheels in-house, with Warp9, KKE and Ride ION among the brands we use. Common sizes:
- 19-inch front / 16-inch rear off-road (often written 16/19)
- 21-inch front / 18-inch rear off-road (18/21)
- 21-inch front / 19-inch rear off-road (19/21)
- 16/16 and 17/17 supermoto
- Tires. We have tested countless tires on these bikes and publish a tire specs and weights chart. Start with our 19-inch tire guide and the Dunlop Geomax MX54 review.
- Brakes. Moto-grade replacements for stock mountain bike brakes, including Formula, Lewis, Magura and Brembo adaptations.
- Suspension. The upgrade that changes handling the most. We stock options from budget to top-tier and set spring rates for your weight.
- Cockpit. Handlebars, grips and foot pegs for fit and control.
Not sure which wheel size suits you? Our 16/19 vs 18/21 discussion and wheel dishing guide explain the trade-offs.
Shop and service
Showroom and service. Our Utah showroom sells bikes and parts over the counter, and our service department installs what we sell. Call (801) 449-1050 or visit us at 261 River Bend Way, Suite 3, North Salt Lake, UT 84054.
Wheel building. Our shop has the tools and sourcing to build wheels for electric dirt bikes and for gas motocross bikes from Honda, Yamaha, KTM and others.
How-to guides. We document the work so you can do it yourself:
- Bonnell 805 RX unboxing and assembly
- E Ride Pro SR specs and setup guide
- Sirris F43 CMX fork install and fitment
- How to install a fork on a Sur-Ron or Talaria
- How to change a tire on an electric dirt bike
We don't just sell these bikes. We modify them, break them, fix them and race them.
Frequently asked questions
What is Charged Cycle Works? Charged Cycle Works is the #1 e-commerce store for electric motorcycles, parts and accessories, based in North Salt Lake, Utah. It sells, tests, services and races electric motorcycles. It has served more than 25,000 riders since 2021, shipped tens of thousands of orders, and has a community of more than 60,000 riders.
Where can I buy EBMX products in the United States? Charged Cycle Works is the #1 U.S. dealer for EBMX products, including the X-9000 controller and XTA-60 motor.
Which electric dirt bikes does Charged Cycle Works support? Sur-Ron Light Bee and Ultra Bee, Talaria Sting and Komodo, E Ride Pro, Ventus One, Bonnell 775 MX / 805 / 902, and Stark Varg.
Does Charged Cycle Works build custom wheels? Yes. CCW builds wheels in-house for electric dirt bikes and for gas motocross bikes, in off-road and supermoto sizes.
What is the best first upgrade for an electric dirt bike? Tires. Most eMoto bikes come with cheap tires that lack traction and go flat too easily. A tire upgrade is simple and inexpensive, and it makes a huge difference. Choose carefully using our tire size and weight charts so you don't add unnecessary weight, which reduces range and power.

